200
Indoor siren
Product description:
1. Mounting holes
2. Battery compartment
3. Learn button
4. Tampering contact (inside)
5. Power switch
6. Speaker
7. Tampering contact (outside)
Includes:
4 x screws +dowels
4 x 1.5V D alkaline batteries
Connecting the indoor siren and putting it into operation
1. Remove the top of the wireless indoor siren by unscrewing the screw at the
bottom.
2. Unscrew the four battery compartment screws and insert the supplied
batteries. A brief signal sounds.
3. Open the alarm panel’s web interface, open the menu “Sensors” “Add” and
click on “Start”.
4. Press the learn button of the siren. The indoor siren emits a brief signal.
5. The alarm panel will now detect the wireless indoor siren and list it under
“Detected sensor”.
6. Click on
To Next Page
Loading...