314
Vibration sensor
The vibration sensor dependably registers shocks and vibrations. This sensor is ideal for
the protection of windows, doors, or various other objects and alarms you immediately at
the first attempt of an intrusion.
Data:
Dimensions 44mm (1.73 inches) Ø, 16mm (0.62 inches) height
Weight: approx. 26 gram (0.05 lbs)
Place of installation: Indoors (windows, doors, ec.t)
Working environment: -10°C to +45°C (14F to 113F)
Humidity: Maximal 85% (non-condensing)
Radio frequency: 0,868 GHz
Detection method: Shocks
Product description:
1. Learn button
The learn button is in a recess of the sensor’s chassis and can be used by
means of a small screwdriver or a staple. The learn button is used to connect
the vibration sensor to the alarm panel, as well as, to manually transmit a
status signal.
2. LED
The LED of the vibration sensor only lights up under certain circumstances –
otherwise, it does not light up:
The vibration sensor was connected to the alarm panel.
Sensitivity settings have been transmitted to the vibration sensor by the
alarm panel.
Battery:
The vibration sensor uses a 3V (CR2477) lithium battery. If the battery runs low,
the supervision function of the alarm panel detects this and you will be informed
about the low battery of the sensor.
To open the battery compartment, you best use a small slotted screwdriver.
Take care that the plus (+) side of the battery is always on top when inserting a
battery into the sensor. If you insert the battery the wrong way, you can damage
the vibration sensor.
To Next Page
Loading...