195
Glass breaking sensor V2
Product description:
The glass breaking sensor V2 detects the sound of breaking window glass and notifies
the alarm panel.
Sensor data:
Dimensions (without mount) 7.5 x .7.5 x 2.38 cm (2.95 x 2.95 x 0.93 inches)
Weight: approx. 65 gram (0.14 pounds)
Place of installation: Only indoors. Ideally, opposite of the secured window.
Working environment: -10°C to +45°C (14F to 113F)
Humidity: Maximal 85% (non-condensing)
Radio frequency: 868 MHz
1. Green LED (inside)
2. Red LED (inside)
3. Microphone
4. DIP Switch
5. Battery compartment
6. Learn button
7. Tampering contact
8. Mounting holes
Green LED:
During test mode, the green LED flashes every time a “glass break” alarm is
detected.
Red LED:
The red LED flashes under the following circumstances:
o When the tampering contact is opened or closed.
o When the lean button is pressed.
o During test mode if a “glass break” alarm is detected.
To Next Page
Loading...