7
Introduction
Thank you for purchasing the XT alarm panel. Before you start the alarm panel, please
take the time to read the following safety and installation information carefully and
attentively.
This manual is for the alarm panels XT1 Plus, XT2, XT2 Plus, and XT3. Some chapters
and/or functions are not available for all models. To indicate a chapter that is not
applicable for all alarm panels, we use a green indication.
It is imperative to comply with these instructions in order to ensure the safe operation. If
you have any further questions, please contact your local retailer or LUPUS-Electronics
directly. Your LUPUS XT was developed and built with state-of-the-art technology and
complies with European and German standards.
Please keep this manual safely to be able to answer possible questions in the future. The
manual is an integral part of the product even in case it is resold to a third party.
Important:
We update and improve this manual regularly (new sensors/functions). Please
refer to our website to get the latest manual version for download as a pdf file:
(http://www.lupus-electronics.de/Alarm-Smarthome/).
We recommend updating the firmware of the alarm panel regularly to eliminate
minor errors and implement new functions. Please refer to the chapter
“Firmware” for more detailed information.
In case a sensor is no longer sold or was replaced by a newer model, the manual
of the old sensor is deleted from this manual for reasons of clarity. You can find
the manual of an old sensor on our website: https://www.lupus-
electronics.de/en/service/eol-product-downloads/
You can upgrade old XT2 alarm panels by means of a USB dongle in order to
support the latest sensors (not the SSL encryption though).
To Next Page
Loading...