239
Outdoor siren V2
The outdoor siren V2 features an IP56 protection class and, in case of alarms, alerts you
by activating the siren and a stroboscope. The outdoor siren V2 can also alert in case of
tampering, low battery, or radio communication interferences.
Product description:
1. Mounting holes
2. Fastening screw for LED cover
3. Mains adapter input
To connect a 9V 1A mains adapter (not included) to
operate the siren without batteries.
4. Power switch
The outdoor siren can be operated with four batteries or
alternatively a 9 V mains adapter.
The switch can be set to three positions:
BT4: If you want to operate the outdoor siren with
batteries, set the switch to BT4.
If an additional 9 V mains adapter is connected, the
siren uses the power from the mains adapter and
the batteries only in exceptional cases as redundant
power supply.
Off: Power supply by batteries is deactivated. Use
a 9 V power supply unit to continue to operate the outdoor siren V2.
BT2: Do not use this setting (reserved)!
5. LED group 3
6. LED group 2
7. LED group 1
8. Learn button
9. Battery compartment
10. Tampering contact
Scope of delivery:
The scope of delivery includes:
Outdoor siren V2
4 x wall plugs
4 x 4 mm x 30 mm Phillips head screws
4 x 1.5 V D alkaline batteries (already installed in housing)
Working environment:
-10°C – 45°C (14F – 113F)
To Next Page
Loading...