Lupus Electronics XT 1 Plus - Small Indoor Siren V2 Installation

284
Small indoor siren V2
Attention:
This product is not compatible with the XT1 or XT2 without “Upgrade dongle to XT2
Plus.”
Product description:
The indoor siren can be used with every customary socket. It sounds an alarm signal at
95 dB in case of alarm. Additionally, the siren functions as a ZigBee S repeater (since
manufacturing date 2019) and automatically enhances the range of other Zigbee devices.
1. Learn button / LED indicator
Function of learn button
1. Press once to send a supervision signal (if
siren is already added to the alarm panel).
2. Keep the learn button pressed for 10 seconds
to reset the siren and to send out a connection
request.
2. LED indicator:
1. Flashes once:
 Alarm system is armed.
2. Flashes twice:
 Alarm system is disarmed.
 The siren was added successfully.
3. Flashes permanently:
 An alarm was triggered.
2. Siren speaker
List of signals and what they mean:
Event
Audio signal
Volume
Alarm
Permanent until the end of
the alarm
Selectable: Silent, low,
medium, high
Arm / Home mode
One beep
Selectable: Silent, low,
medium, high
Disarm
Two beeps
Selectable: Silent, low,
medium, high
Entrance/exit delay
Beep every second
Selectable: Silent, low,
medium, high
Doorbell
Identical to alarm panel
Selectable: Silent, low,
medium, high