Need help?Do you have a question about the Lupus Electronics XT 1 Plus and is the answer not in the manual?
General| Brand | Lupus Electronics |
|---|---|
| Model | XT 1 Plus |
| Category | Control Panel |
| Language | English |
Key information for users including manual updates, firmware, and sensor compatibility.
Instructions for reporting and addressing any detected defects in the system.
Specifies the intended use of the alarm panel and limitations.
Guidelines for environmentally responsible disposal of the electronic device.
Details on the product's compliance with relevant regulations and standards.
Installing the alarm panel and first access via the LAN.
Connecting new sensors and accessing their detailed manuals.
Configuring essential alarm panel settings for basic operation.
Setting up how and when the panel notifies about alarms.
Information on port forwarding and accessing the panel remotely.
Verifying system errors, arming/disarming, and alarm control.
Configuring Smarthome rules and examples for automation.
Crucial location choice for smooth system operation and optimal transmission distances.
Notes on power failure, battery charging, and notification delays.
Notes on power failure, battery charging, and notification delays.
Control of the alarm panel via the main menu and its sub-menus.
Display important information and customize displayed items.
Shows the current time and date in the top right corner.
Access to manual, FAQs, quick access, and control options.
Default GRID interface structure with ten predefined apps.
Set alarm status to Arm, Disarm, or one of the Home modes.
Displays current important messages and system status.
Shows important sensor and system messages, listing the latest events.
Displays installed sensors with icon, name, signal strength, and status.
Displays live camera streams; requires adding cameras in Smarthome.
Shows recent sensor messages like temperature and power consumption.
Manage GRID layouts and active profiles for personalized views.
Adjust overview page by unlocking, sorting, and adding new apps.
View all connected sensors and their integration details.
Integrate new sensors into the alarm panel.
Check signal strength for installed sensors.
Configure the universal IR controller for appliance control.
Displays connected sensors with type, name, status, signal strength, and battery.
Step-by-step guide for adding sensors using the learn mode.
Create and manage up to 100 automation rules with groups and profiles.
Define rules with conditions, schedules, and actions for home automation.
Organize automation rules into groups for better clarity.
Create and manage up to five profiles for different automation scenarios.
Define trigger conditions for automation rules (alarm, sensor, mode).
Set automation execution times based on specific days, times, or intervals.
Specify actions like mode changes, scenario execution, or switch control.
Rule setup to reduce power consumption by switching off devices when armed.
Rule setup for controlling a lawn sprinkler based on time schedule.
Rule setup for controlling shutters based on sunrise/sunset and alarm status.
Rule setup for dimmable lamp control triggered by motion detection.
Using Action URL and CGI commands for controlling network devices.
Define general, area, and alarm settings for the panel.
Configure sensor verification, entry/exit delays, and home mode delays.
Configure browser notifications, background images, themes, and languages.
Define which alarm events trigger internal and external sirens.
Configure alarms and status changes via GSM, internet, phone call, or email.
Connect to third-party security services for event reporting.
Define and manage user PINs for area access and authorization.
Enter silent alarm, guard service, and temporary codes for keypad operation.
Set up IP address, subnet mask, gateway, and DNS for network connectivity.
Assign a hostname to your public IP address for dynamic DNS service.
Connect to Amazon Alexa for voice control (German Alexa skills only).
Connect to Fritz!Box for call monitoring and automation triggers.
Connect NUKI door locks to the alarm panel via Nuki Bridge.
Check battery, tamper, interference, power, GSM, and transmission status.
Understand requirements and potential issues with IPv4/IPv6 for remote access.
Step-by-step guide for connecting and adding the relay to the panel.
Procedure to check signal strength of the relay at its installation location.
Step-by-step guide for connecting and adding the relay to the panel.
Procedure to check signal strength of the relay at its installation location.
Step-by-step guide for connecting and adding the relay to the panel.
Procedure to check signal strength of the relay at its installation location.
Step-by-step guide for connecting and adding the detector to the panel.
Procedure to check signal strength of the detector at its installation location.
Recommendations for optimal placement and mounting of the motion detector.
Step-by-step guide for connecting and adding the repeater to the panel.
Procedure to check signal strength of the repeater.
Testing sensor connection to the repeater.
Resetting the wireless repeater V2 to factory default settings.
Setting up repeaters in a chain for extended signal coverage.
Process for linking repeaters in a chain.
Examples of sensor connection configurations within a repeater mesh network.
To Next Page