103
The most important event codes:
Detector with medical alarm feature
Medical emergency controller, panic button
Detector with fire alarm feature
Panic button on remote control
Detector with silent alarm feature
Detector with “burglary alarm instant” or “burglary
alarm follow” feature
Burglary alarm
(perimeter)
Detector with “entry delay” feature released in arm
mode
Detector with “entry delay” feature released in
home mode
Detector with “burglary alarm outdoor” feature
If supervision check of sensor fails or is restored
Detector with „gas alarm“ feature
High temperature alarm released
Low temperature alarm released
Power failure for more than ten seconds / power
supply restored
Low battery power of alarm panel / battery power
restored
Alarm panel battery
defect
Battery of alarm panel removed or off / battery
available again
Radio communication defective / restored
Arming despite available error state
Tampering contact of sensor triggered / restored
Battery power of sensor low / restored
General malfunctions of alarm panel restart
Arm/disarm remote
control
Arming or disarming by means of remote control
Arming or disarming by internet, app, or text
Arming or disarming by keypad
Arming or disarming by sensor with Set/Unset
option
Panic alarm was stopped by panic button
Alarm panel executes period test
Home automation rule
executed
A home automation rule was executed
To Next Page
Loading...