158
Please Note:
“Sensors” “List” “Status” shows the status of the relay (on 7 off).
The 12 / 24 V wireless relay can be activated or deactivated manually via the web
interface of the alarm panel (“Smarthome” “Wireless plugs” or “Home” “Radio
switch list”).
Via “Smarthome” “Automation”, you can set up automation rules to activate or
deactivate the wireless relay. Examples can be found in the manual of the alarm
panel.
The 12 / 24 V wireless relay requires at least 300 mA to work properly.
The maximum load is 5 Ampere / 24V. Do not exceed this limit!
After a power failure, the 12 / 24 V relay does not return to the last state prior to
the power failure.
The relay is incompatible with the wireless repeater and cannot be saved in the
backup file.
ATTENTION:
Never open the housing. The risk of an electromagnetic shock dangerous to
life is available.
To Next Page
Loading...