20
3. The place of installation is crucial for the smooth operation of the system, as all
sensors are connected to the alarm panel wirelessly (868 MHz or 2.4 GHz).
Therefore, the alarm panel should be installed at a central location, in order to
ensure the shortest possible transmission distances to all sensors, as well as,
an Ethernet connection to your router or switch. The wireless transmission
range of the alarm panel can be enhanced by using a wireless repeater.
4. Drill through the indicated points at the back of the alarm panel. Use the
installation template to drill holes for the dowels. Check the wall for wiring and
pipes before drilling the holes.
Back:
To Next Page
Loading...