22
Allows you to inset a Mini SIM card (not included) to use a second alarm route
via SMS or phone call.
B. Micro SD-card slot
Allows you to save recordings of connected LUPUS cameras (not yet
implemented).
C. USB port
Currently no function.
D. I/O terminal (2x alarm input / 1x alarm output)
Allows you to connect wired devices. Dry contact input and output. See chapter
I/O terminal for more information.
E. LAN port
F. Power supply connector
G. Reset button
H. Battery on/off switch
In case of power failure, the internal battery can supply the alarm panel
with power for approx. 16 hours.
It takes approx. 6 to 9 hours to fully charge the emergency battery!
In case of a power failure, it takes at least three minutes until the alarm
panel
I. Tampering contact
Opening the chassis triggers an alarm.
To Next Page
Loading...