Lupus Electronics XT 1 Plus - Page 83

83
 Integration of an older 800 + / 800 D1 video recorder
The URL consists of the following elements:
DVR address: 192.168.0.155 Port: 10001
Username: test Password: test
Camera image: /cgi-bin/net_jpeg.cgi? Channel: 3
Example URL:
http://test:test@192.168.0.155:10001/cgi-bin/net_jpeg.cgi?ch=2
Please note:
 You need to subtract 1 from channel number. Channel 3 become ch=2 in the
URL command.
 These older recorder series can only display JPEG images and not a
livestream in the alarm panel.
 Integration of a LE 20x camera (LE 201 / 202 / 203 / 204) via the “Other” option
The URL consists of the following elements:
IP-Address: 192.168.123.11 Port: 8080
Username: test Password: test
Image path: /cgi-bin/mjpg/video.cgi?channel=0&subtype=1
Example URL:
http://192.168.123.11:8080/cgi-bin/mjpg/video.cgi?channel=0&
subtype=1&user=test&password=test
 Integration of a LUPUSNET HD camera (LE 9xx series)
The URL consists of the following elements:
IP address: 192.168.0.200 Port: 10030
User name: test Password: test
Image path: /GetData.cgi Stream: 2:
Example URL:
http://test:test@192.168.0.200:10030/GetData.cgi?CH=2
or
http://192.168.0.200:10030/GetData.cgi?CH=2&usr=test&pwd=test
Please note:
 All examples only use sample data. You need to enter the username, password,
IP address, and, if required, channel of your camera (marked in red in the
examples).
 [Only of you use “Other” to add the camera] In order to receive the live
stream of your cameras while you are not at home (not connected to your local
area network), you need to use your DDNS address instead of the IP address
and you need to create a port forwarding in your router.
 Do not use the Internet Explorer! Internet Explorer does not support MJPEG
streams.
 The PIR network camera cannot be added to this menu.