214323 483 Revision B
Installing tine tube support (if installed) bushings:
Figure 6.273: Cam End
20. Position bushing halves (B) on the tine tube with the
flangeless end adjacent to the reel arm, and position the
lug in each bushing half into the hole in tine tube (A).
Figure 6.274: Support
21. Slide support (A) onto bushing (B).
Figure 6.275: Opposite Support
22. For the opposite tine tube, rotate support (A) or slightly
move the tine tube until it clears channels (C).
MAINTENANCE AND SERVICING
To Next Page
Loading...
