Matrix PRASAR UCS - Page 1002

Matrix PRASAR UCS System Manual 993
Page Zone 2
Now, program Page Zones using Jeeves or by dialing SE commands from a Telephone.
Programming Page Zones using Jeeves
• Login as System Engineer.
• Under Configuration, click Page Zones to open the page.
• The first three page zones appear on this page.
• Refer to the Page Zones you created on paper and program the following parameters in each Page Zone:
• Name of Page Zone: Enter the name you want to assign to the Page Zone.
• Member Type: Select the type of extension you want to include in the Page Zone: SIP extension.
:
:
32
Member Number Type of Extension
SIP Extension
Port Number
1 SIP 007
2 SIP 010
3 SIP 012
4 SIP 013
:
:
32
Member Number Type of Extension
SIP Extension
Port Number