Matrix PRASAR UCS System Manual 1055
• access to Remote Login, Web Server, Third Party Auto Configuration will be allowed only to the
configured Trusted IP Address/es.
• Trusted IP Addresses configured for the registration of the SIP Extension, will not be blacklisted.
The successful attempt to access PRASAR UCS using Web will be logged in the System Activity Log.
When you press the Reset Switch, the parameters Allow Remote Login, Allow Web Server Access From,
will be set to default. For details, see “System Security”.
How to configure
• Login as System Engineer.
• Under Configuration, click Security Settings.
Trusted IPv4 Address/es
•In Allow Remote Login, you can select Don’t Allow, All IP Address/es or Only Trusted IP Address/es
option. By default, Don’t Allow is selected.
If you want to allow access to generate the password for the Remote Login from all IP Addresses, select
All IP Address/es option.
If you want to allow access to generate the password for the Remote Login from specific IP Addresses
only:
• select Only Trusted IP Address/es option.
• configure the IP Address/es and their respective Subnet Mask in the Trusted IPv4 Address/es table.
• enable the Allow Remote Login check box in the Trusted IPv4 Address/es table.
If you select All IP Address/es or Only Trusted IP Address/es option, click Generate Key.
The Key Generation window opens.
In Key Count, select the number of keys you wish to generate. You can generate maximum 10 keys.
To Next Page
Loading...