1056 Matrix PRASAR UCS System Manual
Click Generate.
The number of keys you selected are generated and saved in a file. Using these keys you can remotely
login into the system.
For further assistance for Remote Login, along with this file contact Matrix Technical Support Team.
• In Allow Web Server Access, you can select Don’t Allow, All IP Address/es or Only Trusted IP Address/
es option. By default, All IP Address/es is selected.
If you do not want to allow access to the Web Server from any IP Addresses, select Don’t Allow option.
If you want to allow access to the Web Server from specific IP Addresses only:
• select Only Trusted IP Address/es option.
• configure the IP Address/es and their respective Subnet Mask in the Trusted IPv4 Address/es table.
• enable the Allow Web Server check box in the Trusted IPv4 Address/es table.
• In Allow Auto Configuration of Third Party SIP Phones, you can select Don’t Allow, All IP Address/es or
Only Trusted IP Address/es option. By default, Don’t Allow is selected.
If you want to allow Auto Configuration of Third Party SIP Phones from all IP Addresses, select All IP
Address/es option.
If you want to allow Auto Configuration of Third Party SIP Phones from specific IP Addresses only:
• select Only Trusted IP Address/es option.
• configure the IP Address/es and their respective Subnet Mask in the Trusted IPv4 Address/es table.
• enable the Allow Auto Configuration of Third Party SIP Phones check box in the Trusted IPv4
Address/es table.
• By default, the Allow SIP Extensions Registration check box is disabled. If you want to allow SIP
extensions registration from the WAN Port, select the check box.
• If you allow SIP Extension Registration, you can Black List SIP Extension IP Address:Port on
multiple Authentication Failure Attempts.
By default, All IP Address/es option is selected. If you do not want to include the Trusted IP
Addresses, select Except Trusted IP Address/es option.
If you select Except Trusted IP Address/es,
• configure the Trusted IP Address/es and their respective Subnet Mask in the Trusted IPv4
Address/es table.
• enable the Black List SIP Extension IP Address:Port except check box for those IP Addresses
which you do not want to blacklist.
• Click Submit.
Trusted IPv6 Address/es
•In Allow Remote Login, you can select Don’t Allow, All IP Address/es or Only Trusted IP Address/es
option. By default, Don’t Allow is selected.
To Next Page
Loading...