Matrix PRASAR UCS System Manual 1057
If you want to allow access to generate the password for the Remote Login from all IP Addresses, select
All IP Address/es option.
If you want to allow access to generate the password for the Remote Login from specific IP Addresses
only:
• select Only Trusted IP Address/es option.
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Allow Remote Login check box in the Trusted IPv6 Address/es table.
If you select All IP Address/es or Only Trusted IP Address/es option, click Generate Key.
The Key Generation window opens.
In Key Count, select the number of keys you wish to generate. You can generate maximum 10 keys.
Click Generate.
The number of keys you selected are generated and saved in a file. Using these keys you can remotely
login into the system.
For further assistance for Remote Login, along with this file contact Matrix Technical Support Team.
• In Allow Web Server Access, you can select Don’t Allow, All IP Address/es or Only Trusted IP Address/
es. By default, All IP Address/es is selected.
If you do not want to allow access to the Web Server from any IP Addresses, select Don’t Allow option.
If you want to allow access to the Web Server from specific IP Addresses only:
• select Only Trusted IP Address/es option.
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Allow Web Server check box in the Trusted IPv6 Address/es table.
• In Allow Auto Configuration of Third Party SIP Phones, you can select Don’t Allow, All IP Address/es or
Only Trusted IP Address/es. By default, Don’t Allow is selected.
If you want to Allow Auto Configuration of Third Party SIP Phones from all IP Addresses, select All IP
Address/es option.
If you want to Allow Auto Configuration of Third Party SIP Phones from specific IP Addresses only:
• select Only Trusted IP Address/es option.
• configure the IPv6 Address/es and their respective Prefix Length in the Trusted IPv6 Address/es
table. The Prefix Length is a decimal value that indicates how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address).
• enable the Allow Auto Configuration of Third Party SIP Phones check box in the Trusted IPv6
Address/es table.
• By default, the Allow SIP Extensions Registration check box is disabled. If you want to allow SIP
extensions registration from the WAN Port, select the check box.
To Next Page
Loading...