1068 Matrix PRASAR UCS System Manual
• Click the SNMP link.
MIB Files
If the Manager needs to access any status or information about the client, the Manager must download and install
the MIB files on the local disk.
To download these files,
• Click the Click to download MIB button.
• You will get a prompt with the option to open the file or save the file to a location. Save the file on the local
disk.
SNMP Settings
• Click SNMP Settings to expand.
• Select the Enable SNMP? check box. Default: Disabled.
• Configure the SNMP Listening Port. Valid Range:161, 1025-60000. Default: 161.
To Next Page
Loading...