Matrix PRASAR UCS System Manual 1101
• The Matrix Format occupies 5 character spaces.
• Check-Inn Format occupies 4 character spaces.
• The First Character in the Check-Inn Format is X (Fixed). The remaining three characters show the
software port number.
• Date: The date on which the call was received. The date fill check box is to be enabled.
• Filler Character field is applicable for Date, Month and Year, i.e. whether the single digit date is to be
printed as space-X or 0-X. For example, date = 1 is to be displayed as '1' or '01'.
• Where leading zeroes are not required, the date, month and year sub-fields are right aligned and the
spaces are filled with character 'space'.
• The Date field is not linked to the system set option of Date Format. The system set option of Date
format is used, while using features or in configuration reports but not for SMDR Online.
• Time: The time when the call was received. The format of the time field and the time fill check box are
to be programmed.
• Filler Character field is applicable for Hours, Minutes and Seconds i.e. whether the single digit hour is
to be printed as space-X or 0-X. For example, hour = 1 is to be displayed as '1' or '01'.
• In case leading zeroes are not required, Date, Month and Year sub-fields are right aligned and the
spaces are filled with character 'space'.
• Answer Duration: The time after which the call was answered. Program the duration unit and the
duration fill check box.
• Hold Duration: The time for which the call was put on hold.
• Speech Duration: The time for which the call was in speech with the extension.
When Duration Unit = Minutes, the rounding off to the nearest whole number is done. For seconds <= 30,
Minute is not incremented. For seconds > 30, minute is incremented.
• Dialed Number: This is applicable only for calls received on SIP trunks. The number dialed by the
caller is referred to as Dialed Number.
• Calling Number: This is the number of the Caller.
• Connected IP:Port: This is the IP Address:Port of the called party.
• Calling IP:Port: This is the IP Address:Port of the calling party.
• Dialed IP:Port: This is the IP Address:Port of the called party.
• Remarks: You may use this for indicating the Type of Call.
• Reset Serial Number to 001: The Serial number counter can be reset to 001 after 24 hours (from
00:00 HH:MM) or every 6 hours. By default, 'Do not Reset' is selected, which means the serial number
counter will not be automatically reset.
To Next Page
Loading...