Matrix PRASAR UCS - Page 1129

1120 Matrix PRASAR UCS System Manual
• Location: This column indicates the location of the external number to which the call was made.
• The system detects the location from the called location programmed in the Area and Country Code
Tables.
• Called Location is programmed as one of the parameters of the Area Code Table and Country Code
Table. Depending upon the prefix dialed, the Location string is picked up from either Country Code
table or Area Code table.
• Called Location is not displayed for Local Calls.
• The Called Location parameter in the Country Code table and Area Code table is of 8 Characters.
• If the number of characters in the field Called Location is more than Field length then the remaining
characters will not be printed (overlapped by next field).
• If the number of characters in the field Called Location is less than Field length then the remaining
characters in the field Called Location will be filled by spaces.
• Connected Number: This is the external number to which the call was made.
• One way to separate the Connected party number is by Area Code, Exchange code and Subscriber
Number. This is difficult in an Open numbering system, in which the field size of area code, exchange
code are not standard but vary from two digits to four digits (for example, the Area code for 'Mumbai' is
of 2 digits, whereas that of 'Vadodara' is 3 digits).
• In the Closed numbering system, the Area Code, Exchange Code and the Subscriber number are of
fixed length. In such case, including '-' in the called party number is not difficult. Hence, '-' is put in the
called party number. The Connected party number is assumed to be of 10 digits. The first '-' is placed
after four digits, counting from the right. The second '-'is placed after seven digits, counting from the
right. If the dialed number is a local number of 7 digits then the second '-'is not placed. Also, the
remaining three digits are not placed, but filled with character 'space'.
• In this case, even if the call is made to a geographical area where open numbering system is followed,
'-' is placed in the same way.
• PIN: This is a unique four digit code which is assigned to the Extension user.
• Account Code: This is the Account Code using which the call was made.
• Dialed Number: This is applicable only for calls received on SIP trunks. The number dialed by the caller is
referred to as Dialed Number.
• Connected IP:Port: This is the IP Address:Port of the called party.
• Calling IP:Port: This is the IP Address:Port of the calling party.
• Dialed IP:Port: This is the IP Address:Port of the called party.
• Remarks: This column indicates the details of the call; whether it was a DISA call, DOSA call, Auto Redial
Call, type of call maturity.