Matrix PRASAR UCS System Manual 1121
Fixed Characters are used to indicate the type of call, call details, etc. The notations for the Remarks field
are:
• Reset Serial Number to 001: The Serial number counter can be reset to 001 after 24 hours (from 00:00
HH:MM) or every 6 hours. By default, 'No Compulsory Reset' is selected, which means the serial number
counter will not be automatically reset.
• Starting Character - Increment Counter: Specify the starting character of the increment counter as the
serial number rolls over, in this field.
• Reset Increment Counter: The Increment Counter can be reset to 001 after 24 hours (from 00:00
HH:MM) or every 6 hours. By default, 'No Compulsory Reset' is selected, which means the serial number
counter will not be automatically reset.
• Prefix String Required: This flag is to be programmed if the prefix string 0ac1 is to be sent when
interfacing with OG-SMDR Posting Protocol.
• Property Code: Enter the property code required by the CAS.
• Currency Symbol (Enter Decimal Value): Enter currency symbol to be used.
Call Type Indicator
In the Call Record, you can also include the Type of Call: local, national, international, by configuring the Call Type
Indicator Table.
DDISA Call
A Auto Redial Call
CCPD
K 12KHz/16KHz
R Reversal
D Delay
I Connect
To Next Page
Loading...