Matrix PRASAR UCS - Page 1135

1126 Matrix PRASAR UCS System Manual
29
Backward DST Applied at: x x = Date and Time when DST is applied
30
DST Config Change: x
x = "Enable" or "Disable"
Display "x" as "Disable" when DST Mode is set from
"Manual/Scheduled" to "Disable".
Display "x" as "Enable" when DST Mode is set from
"Disable" to "Manual/Scheduled".
Don't display "x" when DST Mode is set from "Manual"
to "Scheduled" or vice versa.
31
Future Use
32
Future Use
33
Login blocked for IP=IP_ADDRESS
"IP_ADDRESS" should be the IP Address from which
the last failure attempt was made.
LOGIN_NAME should be actual Login ID i.e. SE or SA
or FDU.
34
IP= IP_ADDRESS blocked for Auto Prov. of
User SIP_ID
"IP_ADDRESS" should be the IP Address from which
the last failure attempt was made.
SIP_ID should be SIP ID of user.
35
"IP= IP_ADDRESS:PORT blocked
IP_ADDRESS:PORT should be the IP Address and
Port from which the last failure attempt was made.
36
Send to Network Error for Connection ID
XXX
XXX is the connection id for which the call is released
by the VoIP
37
Future Use
38
System Reset
39
General Mailbox is Full
40
Octasic X temp increased. System will go in
Thermal Sleep Mode
X= Octasic module number
41
Mindspeed temp increased. System will go
in Thermal Sleep Mode
42
Trunk Active, SIP Trunk=xx xx=SIP Trunk number
43
CPU Usage is High. System Performance
may degrade.
44
CPU Usage is now back to Normal
45
RAM Usage is High. System Performance
may degrade.
46
RAM Usage is now back to Normal
47
LAN Ethernet Link Up
48
WAN Ethernet Link Up
Event Index Activity Description