Matrix PRASAR UCS System Manual 1127
When installed in the Hotel mode, the PRASAR UCS captures Hotel-Motel Activity Log. To know more, see the
PRASAR UCS Hospitality System Manual.
How to configure
To be able to use this feature, you must enable System activity log (online or report), and assign a Destination Port
for the Activity Logs.
To view the system activity log, you must assign the IP Address of the remote Syslog server as the Destination
Port.
If the System Administrator phone is an Extended IP Phone, you may assign a DSS key for System Activity Log.
49
LOGIN_NAME Login IP=IP_ADDRESS
LOGIN_NAME = Actual Login ID i.e. SE or SA or FDU
IP_ADDRESS = IP Address from which is login is
made
50
System Restart by xx
xx = IP Address when system is restarted from Web
JEEVES or Extension Number when system is
restarted using command
51
System started as SERVER_MODE
"SERVER_MODE" - Configured "Server Mode" -
"Primary" or "Backup" in "Redundancy Configuration".
52
Virtual IP Address Conflict Detected
53
Isolation Detected
54
Initial synchronization…
55
Sync failed
56
Sync success
57
Declared as - STATE
"STATE" - "Active" or "Standby" based on startup or
heartbeat process or failover process.
58
Redundancy configuration changed - FLAG
"FLAG" - Value of "Enable Redundancy" flag i.e.
"Enable" or "Disable"
59
Remote Server connected
60
Remote Server not available
61
Redundancy license grace period
62
License Key in use - SYSTEM
"SYSTEM" - Value can be "Primary" or "Backup" or
"Other". Primary or Backup is decided on configured
"Server Mode" - "Primary" or "Backup" in "Redundancy
Configuration".
63
Redundancy Call Unacknowledged by
nnnnnn
nnnnnn = max. 6 digit flexible number of the station
that did not acknowledged the Redundancy Call
64
Redundancy Call is Acknowledged by
nnnnnn
nnnnnn = max. 6 digit flexible number of the station
that acknowledged the Redundancy Call
65
Validity expires in 5 days -
CERTIFICATE_NAME
CERTIFICATE_NAME = Friendly Name of the
certificate
Event Index Activity Description
To Next Page
Loading...