Matrix PRASAR UCS System Manual 1143
If you keep the number string field blank, PRASAR UCS will remove '+' sign from the CLI of calling
party and present the remaining digits on the CLI of the Called Party.
For example:
The number string +919327237228 is received as CLI.
If ‘00’ is configured as the replace string, the CLI number would become 00919327237228
If no replacement string is configured (that is, left blank), the CLI number would be presented as
919327237228.
• If the Extension creating 3 party conference, disconnects during Conference, you can select
either to Transfer the call or Disconnect other parties.
• If you select to Transfer the call, the 3-party conference is converted into a two-way speech
between the other two parties.
• If you select to Disconnect other parties, all the parties involved in the 3-party conference are
disconnected.
See “Conference-3 Party” for more details.
• To play a beep to participants of a conference to indicate inclusion of a new participant, select the Play
Beep when Conference/Dial-in Conference begins check box selected. Default: Enabled.
This check box is common for the features “Conference-Multiparty”, “Conference Dial-In” and
“Emergency Conference”. When this check box is enabled,
• the system plays beeps to the other participants in a Dial-In Conference when a new participant
joins in (dials into an on-going Dial-In Conference).
• the system plays beeps to the other participants connected in a Multi-Party Conference and an
Emergency Conference, when a new participant is included.
If you disable this Check box, the existing participants in a Dial-In or Multi-party conference will not hear
any beep tone indicating the addition of a new participant.
• Play Beep when Raid/Call Taping/Conversation Recording Starts is a common Check box for the
features “Raid”, “Call Taping” and “Conversation Recording”. When this check box is enabled,
• the system plays a warning beep to the extension which is being raided by another extension,
before establishing three-way speech.
• the system plays beeps to the extensions/calling party before it starts taping the call in the common
mailbox or recording the conversation in the extension’s mailbox.
When this check box is disabled, no warning beep will be played in Raid, no indication will be given to
the opposite party when the call is being taped/conversation is being recorded. Default: Enabled.
•In Play Feature Tone in place of Dial Tone when Call Forward is Set, you can select whether you
want the system to play Feature Tone instead of Dial Tone to the extensions when Call Forward is set
on these extensions. When this check box is disabled, the system will play dial tone to the extension on
which Call Forward is set, whenever the extension goes Off-hook. Default: Enabled.
To Next Page
Loading...