1158 Matrix PRASAR UCS System Manual
Changing the SE Password using Jeeves
• Login as System Engineer.
• Under Configuration, click the Change SE Password.
• Under For Web Interface,
• Enter Current Password.
• Enter New Password. The new password must be:
• a minimum of 6 characters to a maximum of 12 characters.
• all ASCII characters (except Percentage %, Hash #, Equal to =, Plus +, And &, Backslash \, Less
than <, Greater than >, Apostrophe ’, Double Quote " and Space) are allowed.
• include atleast one upper-case, one lower-case, one number and one special character.
•In Confirm New Password, re-enter the new password to confirm.
• Click Submit button to save your new password.
For Programming from Extensions
The SE password is a code used to restrict unauthorized access to the SE Mode. The password can be a minimum
of 4 digits to a maximum of 12 digits. The valid digits are from 0 to 9. The default SE Password is 1234. It may be
changed and kept confidential.
The SE Password can be changed from the Jeeves as well as using commands.
Changing the SE Password using Jeeves
• Login as System Engineer.
To Next Page
Loading...