1168 Matrix PRASAR UCS System Manual
There are 8 different Time Table templates to select from.
By default, the Time Table 1 is assigned to all extensions and trunks in their Station Basic Feature Template and
Trunk Feature Template respectively. In Time Table 1, six days of the week - Monday to Saturday have working
hours from 9:00-18:00, break hours from 13:00-14:00 hours and non-working hours from 18:00 to 09:00. Sunday is
a holiday, with all three Time Zones set to 00:00 hours.
You may also customize the default Time Table 1 OR customize and assign a different Time Table to the extensions
and trunks.
PRASAR UCS offers the facility to switch the system into Day/Night Mode at any point of time. When you
set the system in Day/Night Mode, the system overrides the Time Tables assigned to Trunks, extensions
and Operator. According to the mode you selected, it applies Working Hours/Non-Working Hours to run all
the Time-Zone dependent features of the system.
Refer the topic “Day Night Mode” to know more.
How to configure
A Trunk can be assigned Time Table in the “Trunk Feature Template” assigned to it. An extension can be
assigned a time table in the “Station Basic Feature Template” assigned to it.
The default Time Table 1 is assigned to both extensions and trunks of PRASAR UCS. Check if this time table
matches the working hours of the organization, and the Time Zone requirements of the individual extensions and
trunks.
The following extension parameters can be configured differently for different Time Zones:
• Class of Service.
• Toll Control.
• OG Trunk Bundle Group.
Time Table 1
Time Table 2
Time Table 3
Time Table 4
Time Table 5
Time Table 6
Time Table 7
Time Table 8
To Next Page
Loading...