Matrix PRASAR UCS - Page 1178

Matrix PRASAR UCS System Manual 1169
The following trunk parameters can be configured differently for different Time Zones:
• Auto Attendant
•DISA
• Trunk Landing Group
You may retain the default Time Table 1 or customize it to suit your requirements. Or you may customize different
Time Tables and assign them to different extensions and trunks.
Configuring Time Table using Jeeves
• Login as System Engineer.
• Under Configuration, click Time Table.
• Select the desired Time Table number and define the Time Zones, that is, working hours, break hours and
non-working hours.
• Click Submit.
• Now, assign the Time Table you program to the desired Extension/Trunk.
• To assign Time Table to extension, go to Station Basic Feature Template. Refer the topic “Station Basic
Feature Template” for instructions.
• To assign Time Table to Trunks, go to Trunk Feature Template. Refer the topic “Trunk Feature Template”
for details a how to assign timetable to trunks.