Matrix PRASAR UCS System Manual 3
Cross-references are provided in blue font with hyperlinks. You can look up the source by clicking the links.
Instructions
The instructions in this document are written in a numbered, step-by-step format, as follows. Each step, its outcome
and indication/notification, wherever they occur, have been described.
Access Codes
Access codes are strings of digits dialed by an extension to
• Call another extension, Department Group
• Grab a trunk line
• Use a Feature, like Call Transfer, Call Forward.
The Access Codes provided in the instructions throughout this document, are default access codes. It is possible to
change the Access Codes according to user requirement and preferences. Verify with the Installer/System
Engineer, if the default Access Codes have been changed, and use the access codes configured by the System
Engineer. For more information, read the topic “Access Codes” in this document.
Notices
The following symbols have been used for notices to draw your attention to important points.
Important: to indicate something that requires your special attention or to remind you of something you
might need to do when you are using the system.
Caution: to indicate an action or condition that is likely to result in malfunction or damage to the system or
your property.
Warning: to indicate a hazard or an action that will cause damage to the system and or cause bodily harm
to the user.
Tip: to indicate a helpful hint giving you an alternative way to operate the system or carry out a procedure,
or use a feature more efficiently.
Terminology used in this System Manual
The technical terms and Acronyms used in this Manual are standard terms, commonly used in the
telecommunications and data communications industry. Considering the broad group of intended users of this
manual, wherever possible, use of jargon has been avoided.
Acronyms have been defined in the text and a list of the same is appended.
Some of the terms specific to this Manual that you will encounter are defined below:
The words 'UCS', ‘PRASAR UCS’, ‘Server’ and ‘System’ are used interchangeably and synonymously to mean
Unified Communication Server.
To Next Page
Loading...