Matrix PRASAR UCS System Manual 1223
• The VMS prompts: "Record your message after the beep and press any digit to end."
• Speak to record your comment and press # to end recording.
• The VMS prompts: "To request read receipt press 1, to ignore read receipt press 2."
• To forward message without comment dial '3'. The VMS prompts: "Enter the Destinations".
• Dial Destination number/Distribution list number to forward the message.
• The system provides an option to the caller to verify the message before storing the same. Enable the
Message Verification check box and configure the digits for the Message Leave Options. The message
will be played as per the digits selected for the options. For detailed instructions, see “Message Send/
Forward Settings” .
• Extension users must be careful in dialing destination numbers. If invalid destination is entered then the
VMS will clear all the entries and will ask the mailbox owner to re-enter all the destinations again.
• A message can be forwarded to maximum 10 destinations. A destination can be an extension or a
distribution list.
To Next Page
Loading...