Matrix PRASAR UCS - Page 1243

1234 Matrix PRASAR UCS System Manual
Certificate Management
• Certificate for SIP over TLS: Select the Certificate that will be used to establish secure SIP connection
between server and IP devices. Default: Default System Certificate.
• Certificate for HTTPS: Select the Certificate that will be used to establish secure HTTP connection
between server and clients. Default: Default System Certificate.
If you change the Certificate in Certificate for SIP over TLS or Certificate for HTTPS, then it may result
in drop of all ongoing TLS connections and VoIP calls.
• Click Submit to save the changes you made.
Certificates
Regenerate Root CA
You may use this facility if you want to generate a Root Certificate depending upon the installation scenario.
On regeneration of a Root CA Certificate, the default Root CA Certificate will get replaced. Additionally, all
the Self-Signed System Certificates are regenerated and replace the existing ones.
To regenerate a Root CA Certificate,
• Click the Regenerate Root CA button.
A new window opens which displays the parameters to be configured.
• Country Name: - Select the name of the country from the list. Default: India (IN).
• State or Province: - Enter the full name of the state or province. For example, Gujarat.
• Locality Name: Enter the name of the city. For example, Vadodara.
• Organization Name: Enter the name of your organization where PRASAR UCS is installed. For example,
Matrix.
• Organizational Unit Name: Enter the name of the unit or section or domain of your organization, where
PRASAR UCS is installed. For example, Factory.