Matrix PRASAR UCS System Manual 1235
• Common Name: Enter the FQDN or IP Address of the system. This Common Name serves as the
distinguishing factor. The Common Name can be a maximum of 64 characters. For example,
www.prasar.com.
• Email Address: Enter the Email address of your host. For example, xyz@matrix.com. The Email Address
can be a maximum of 40 characters.
• Validity Upto: Select any date from the present date of the system to 31
st
December 2036, the duration
for which the certificate should be valid. Default: 31 December 2036.
• Signature Algorithm: Select the algorithm using which the certificate has to be signed. You may select —
SHA-1, SHA-256, SHA-512. Default: SHA-256
• Click Regenerate.
A message appears to confirm that the Certificates have been generated successfully.
Once the Root CA has been successfully generated, the system automatically regenerates the Self-
Signed Certificates using the newly generated Root CA Certificate.
• Click OK to close the window. You will be redirected to the Certificate Management page.
Generate Self-Signed System Certificate
Depending on your installation scenario, you can generate a Self-Signed System Certificate using the details of
your own organization.
The Self-Signed System Certificates cannot be downloaded.
You can generate multiple Self-Signed System Certificates using the same Root CA Certificate.
To generate a Self-Signed System Certificate,
• Click the Generate Self-Signed Certificate button.
A new window opens which displays the default parameters.
To Next Page
Loading...