Matrix PRASAR UCS System Manual 1237
Generate Certificate Signing Request
To generate a Certificate Signing Request (CSR),
• Click the Generate CSR button.
A new window opens which displays the parameters to be configured for generating CSR.
• Country Name: - Select the name of the country from the list. Default: India (IN).
• State or Province: - Enter the full name of the state or province. For example, Gujarat.
• Locality Name: Enter the name of the city. For example, Vadodara
• Organization Name: Enter the name of the organization where PRASAR UCS is installed. For example,
Matrix.
• Organizational Unit Name: Enter the name of the unit or section or domain of your organization, where
PRASAR UCS is installed. For example, Factory.
• Common Name: Enter the FQDN or IP Address of the system. This Common Name serves as the
distinguishing factor. For example, www.prasar.com. The Common Name should not exceed 64
characters.
• Subject Alternate Name: Enter the names of the multiple domains separated by comma (if the same
certificate is to be issued for multiple domains of an organization). For example, DNS:matrixcomsec.com,
IP: 192.168.101.123
Make sure you enter “DNS:” before the domain name and “IP:” before the IP address in the Subject
Alternate Name.
• Email Address: Enter the Email address of your host. For example, xyz@matrix.com. The Email Address
should not exceed 40 characters.
• Signature Algorithm: Select the algorithm using which the certificate has to be signed. You may select —
SH-1, SHA-256,SHA-512. Default: SHA-256
To Next Page
Loading...