Matrix PRASAR UCS - Page 1324

Matrix PRASAR UCS System Manual 1315
Feature List
Supported In SPARSH
VP110/VP710
Remarks
Abbreviated Dialing Yes
Using Access Code
Access Codes Yes Using Access Code
Note : Except Access Code having "F" - Flash
Account Codes Partially Functional Using Access Code
Note: To apply Account Code during call, dial:
Transfer Access Code > Account Code Access Code >
Account Code Number. You need to change Transfer
Access Code from "F" to any of "0-9 digit" or "*" or
"#"
Alarms Yes Using Access Code
Alternate Number
Dialing
Yes
Using Access Code
Authority Codes Yes Using Access Code
Auto Answer Yes Auto Answer will work in both ways:
1. Local Auto Answer of the Phone
2. Using Call-Info or Alert-Info in SIP message from
PRASAR [Features Like Intercom, Paging]
Auto Callback Yes Using Access Code
Auto Redial Yes Using Access Code
Barge - In Yes Using Access Code
BLF for trunks NA
Call Chaining Partially Functional Using Access Code
Note: To apply Call Chaining during call, dial:
Transfer Access Code > Call Chaining Access Code.
You need to change Transfer Access Code from "F" to
any of "0-9 digit" or "*" or "#"
Call Forward Yes Call Forward will work in 3 ways:
1. Using Access Code - It will work
2. Using Local Phone Feature - It will set Locally
3. Using Local Phone Feature + On/Off Code - It will
work. However if for some reason PRASAR rejects
the Call Forward set request from phone then user
won't get any indication of rejection and the Phone
will still set Call Forward Locally even after re
In above 2 cases - Case 2 and Case 3, if Call Forward
is not allowed through CoS of PRASAR , then the call
won’t be forwarded even if the Call Forward can be
seen locally set