Matrix PRASAR UCS - Page 1325

1316 Matrix PRASAR UCS System Manual
Feature List
Supported In SPARSH
VP110/VP71
0
Remarks
Call Hold Partially Functional Only Exclusive hold will work.
Global hold will not work.
As Phone supports only 2 calls, You can hold only
one call at a time.
Call Park Partially Functional Using Access Code
Note: To park call, dial: Transfer Access Code > Call
Park Access Code. You need to change Transfer
Access Code from "F" to any of "0-9 digit" or "*" or
"#"
Call Retrieve Yes Using Access Code
Call Pick Up Yes Using Access Code
Call Progress Tones Yes
Call Taping Yes
Call Toggle Partially Functional Using Access Code
Note: To apply Account Code during call, dial:
Transfer Access Code > Account Code Access Code >
Account Code Number. You need to change Transfer
Access Code from "F" to any of "0-9 digit" or "*" or
"#"
Call Transfer Yes
Blind, Attended and Semi Attended Transfer will
work locally. Refer User Guide.
Using Access Code you need to change the Transfer
Access Code from "F" to any of "0-9 digit" or "*" or
"#"
CLIP Yes
CLIR Yes CLIR will work in 3 ways:
1. Using Access Code - It will work
2. Using Local Phone Feature - It will set Locally
3. Using Local Phone Feature + On/Off Code - It will
work. However if for some reason PRASAR rejects
the CLIR set request from phone then user won't get
any indication of rejection and the Phone will still
set CLIR Locally even after rejection.
In above 2 cases - Case 2 and Case 3, if CLIR is not set
in PRASAR , then your identity will be visible to the
remote user even if CLIR can be seen locally set
Cancel All Station
Features
Yes
Using Access Code