Matrix PRASAR UCS - Page 198

Matrix PRASAR UCS System Manual 189
• Click OK.
The Operator feature appears on the key label.
• Follow the same instructions to assign features to other DSS keys. Selecting the appropriate Function
Type and the Offset for each feature/function.
If you want assign a feature, select FEATURE as function type, and select the desired feature as
Offset.
If you want to use the key to call a SIP extension, select SIP Extension as Function Type and select
the number of the extension as Offset.
To assign direct access to a SIP Trunk, select SIP as Function Type and the desired trunk number from
1 or any other trunk number as Offset.
Click OK, each time you select a Function Type and Offset in the dialog box.