190 Matrix PRASAR UCS System Manual
You can reinstate default key assignment any time, by clicking the Default button at the bottom of the
window.
• When you complete assigning functions to keys, close the window.
• The phone will enter the Auto Configuration mode, when you assign/re-assign certain features in the
key maps. To know more, refer to the SPARSH VP330 User Guide.
• Even if you assign keys for the following feature in the Key Templates, these features will not function:
Transport Mode and SRTP
• Select the protocol to be used to transport the SIP messages. You can select the Transport Mode as TCP
or TLS
32
.
• If you select TCP, make sure the SIP Over TCP check box is selected in VoIP Parameters.
• If you select TLS, make sure the SIP Over TLS check box is selected in VoIP Parameters.
• For secure conversations over SIP, select the Enable SRTP? check box. The SIP messages will be
transported over SRTP only.
RTP Port
• Define RTP Port:
Function Type Offset
Macro
SA Command
Special Keys Digit Pause
Digit A
Digit B
Digit C
Digit D
Enter
Local Menu
Feature Enter SE Programming Mode
Enter SA Programming Mode
Personal Directory Programming
Abbreviated Dialing
Emergency Conference
Self Ring Test
SA Command Prefix
PMS - User Defined Fields
Department Group Call Forward
32. SPARSH VP330 supports TLS Version V1.0 only. To configure the TLS version, refer “Advance Options” in Security Settings.
To Next Page
Loading...