Matrix PRASAR UCS - Page 262

Matrix PRASAR UCS System Manual 253
You can connect/ register three Matrix Extended IP Phones / UC clients/ Standard SIP Phones at three different
location as a single SIP extension. You can register the same or different types of Extended IP Phones/ UC clients/
Standard SIP Phones — at each location.
For Example: You can configure SPARSH VP330 at Location 1, 2 and 3. If you want to use more than one
SPARSH VP330 Extended IP Phones as a SIP Extension, configure their settings at Location 1, Location 2 and
Location 3.
For Auto Provisioning, you must configure the Standard SIP phones at Location1 only. To know more, refer to
“Configuring Standard SIP Phones”.
Station Advanced Feature Template
Enter the template number of the Station Advanced Feature
Template you want to assign to the extensions. By default, Station
Advanced Feature Template number 01 is assigned.
The Station Advanced Feature Template has a set of advanced
features for the extensions such as such as Alarm Notification
settings, Routing of Incoming Auto Attendant Calls, Call Duration
Control, Floor Service and related parameters.
Check if the values in this template fulfills the requirements of the
extensions. If the Template number 01 fulfills the feature
requirements, retain the Template number 01.
If a different set of features are to be allowed to the extensions,
then prepare another template and enter that template number in
this field.
To know how to customize the template, refer to “Station Advanced
Feature Template”.
Call Pickup Group
Enter the Call Pickup Group number you want to assign to the
extensions. By default, Call Pickup Group number 1 is assigned.
Call Pick Up allows the extension user to 'pick up' (answer) calls
ringing on any other extension, by dialing a feature code, without
physically going to the ringing extension. It also allow incoming
calls for the extension to be answered by the other extensions
assigned the same Call Pick-Up group.
For this to work, both the ringing extension and the extension
picking up the call must be in the same 'Call Pick Up Group’.
Refer “Call Pick Up” for instructions on how to create groups.
Station Type
Select the Station Type — Administration/ Guest you want to
assign to the extensions.
Priority
Select the Priority level for the extensions from 1 to 9. By default, 5-
Normal is selected as the Priority level.
Each extension is assigned a Priority Level starting from 1,2, 3....to
9, with '1' being the lowest Priority and '9' being the highest Priority.
To know more about the feature, refer to “Priority”.
Parameters Description