Matrix PRASAR UCS - Page 285

276 Matrix PRASAR UCS System Manual
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
• Click Location 1 and configure the following parameters.
Parameter Description/Action to be Taken
Applicable
Standard SIP
Phone Variant
Enable
Device
Select the Enable Device check box.
Panasonic
UTG200B
Location
Name
Configure the Location Name to identify the phone. The
Location Name can be a maximum of 18 characters.
Default: Blank.
Panasonic
UTG200B
Device Type Select Device Type as Panasonic UTG200B.
Panasonic
UTG200B
MAC
Address
Enter the MAC Address of the Panasonic phone to be
connected at this location. Default: Blank.
PRASAR UCS validates the phone on the basis of the MAC
Address and provides configuration on validation.
Panasonic
UTG200B
Authenticate
HTTP
Provisioning
request
Select the Authenticate HTTP Provisioning request check
box to authenticate HTTP request for security reason.
Default: Disabled.
If you are using the Standard SIP Phone from the Public IP
Address, we recommend you to enable this option.
PRASAR UCS validates the Standard SIP Phone on the
basis of the SIP ID and HTTP Authentication Password and
provides configuration on validation.
Make sure, you have configured SIP ID as HTTP User
Name and HTTP Authentication Password as HTTP
Password in the Standard SIP Phone.
Panasonic
UTG200B
Registrar
Server
Address
Select the appropriate Registrar Server Address according
to your installation scenario
a
to register the Standard SIP
Phone with the SIP Registrar of PRASAR UCS. Default:
Use WAN Port IP Address.
Panasonic
UTG200B
Standard SIP
Authorization
Profile
Select the desired Standard SIP Authorization Profile from
the list of profiles. Default: Panasonic
Panasonic
UTG200B
Display
Language
Displays the Standard SIP Phone language and it is non-
editable.
Panasonic
UTG200B
User
Password
Configure the User Password
b
of the Standard SIP Phone.
It can be a minimum of 6 characters to a maximum of 16
characters. Default: userpass
Panasonic
UTG200B