Matrix PRASAR UCS System Manual 275
• Yealink SIP-T3XG
• Cisco SPA50xG/51xG SIP Phone
• Cisco SPA525G SIP Phone
• Polycom IP Phone
• Snom IP Phone
• Htek 802
• Any Standard SIP Phone
Connecting the Standard SIP Phone
To be able to configure and register the Standard SIP Phone with PRASAR UCS using Auto Provisioning,
• Connect and reboot the Standard SIP Phone.
• Make sure that DHCP is selected as the Connection Type in the Standard SIP Phone.
• For Auto Provisioning, you must configure the Standard SIP phones at Location1 only.
• The phone will automatically fetch the configuration file(s) from PRASAR UCS and will get registered.
Using any third party DHCP Server in your LAN
You can use any third party DHCP Server in your LAN for assigning the ‘Auto Provisioning Server Address’ and
‘Server Port’ to the Standard SIP Phones.
• Make sure that the third party DHCP Server and your Standard SIP Phone, both are connected in the
same subnet as that of the LAN Port of PRASAR UCS.
• Select DHCP Option 66, and configure Data type in that third party DHCP Server in the following format -
http://IP Address:SPARSH Port.
If you are using Auto Provisioning and if the Standard SIP Phone has multiple SIP accounts, it is
recommended to keep the first SIP account in default settings. After Auto Provisioning, the old
configuration, if present for this account will be deleted automatically and it will get registered with PRASAR
UCS.
Configuring Panasonic Standard SIP Phones
You are recommended to complete the following steps before connecting Panasonic UTG200B:
• Decide the physical location of the Standard SIP Phone.
• Configure the settings in the third party DHCP Server. For instructions, see “Using any third party DHCP
Server in your LAN”.
• Configure the SIP Extension Settings in PRASAR UCS. For details, see “Configuring SIP Extension
Settings using Jeeves”
54
• Configure the device specific settings applicable to your Panasonic UTG200B at any one of the Location
1, 2 or 3 on the SIP Extensions page. To do so,
54. Some of the parameters may not be applicable depending on the Standard SIP Phone you have connected. Please refer the spe-
cific Standard SIP Phone manufacturer’s documentation for more details.
To Next Page
Loading...