274 Matrix PRASAR UCS System Manual
• If you are using the system in the Enterprise Mode, by default Administrator is selected as Station Type.
If you are using the system in the Hotel Mode, by default Guest is selected as Station Type. You may
select the Station Type as Administrator for the Hotel Administrative Staff. To know more refer to the
PRASAR UCS Hospitality System Manual.
• You may assign a Personal Directory number to the SIP Extension. Default: 00.
A Personal Directory is a list of 25 frequently dialed numbers, each of which are stored by Index number
(location code), Name and Trunk Access Codes ("Out Going Trunk Bundle Group Index"). The Personal
Directory is necessary for using the features “Abbreviated Dialing” and “Dial By Name”.
When a Personal Directory is assigned to a SIP Extension, make sure you also configure this directory.
The Personal Directory can be programmed by the SIP Extension users and by the System Engineer.
Refer the topic “Abbreviated Dialing” for instructions on programming the Personal Directory.
If Personal Directory is not to be assigned, enter 00 in this field.
• Select a Priority Level for the SIP Extension from 1 to 9. Default; 5-Normal. Each extension of the
PRASAR UCS is assigned a Priority Level starting from 1, 2, 3... to 9, with '1' being lowest Priority and '9'
being highest Priority. Whenever an extension (phone) with higher priority calls an extension with lower
priority, a triple ring is placed on the called extension. To know more, read the feature description “Priority”.
If this SIP extension is assigned to Operator, you may want to set a higher priority for this extension.
• Click Submit to save your Settings.
Configuring Standard SIP Phones using Manual Provisioning
To be able to use Standard SIP Phones/devices with PRASAR UCS, you must configure the following:
• Configure the SIP Extension Settings. For details, see “Configuring SIP Extension Settings using
Jeeves”.
53
• Configure specific parameters (for example, SIP ID/User Name, Authentication ID, Password, Server
Address/Domain Name etc.) in the Standard SIP Phone/device which are required to register it with
system. For more information, refer the product documentation supplied with the Standard SIP Phone/
device you want to use.
Configuring Standard SIP Phones using Auto Provisioning
PRASAR UCS supports the following third party Standard SIP Phones for Auto Provisioning
• Panasonic UTG200B
• Grandstream GXP110x
• Grandstream GXP2200
• Grandstream GXP21xx/116x/14xx
• Grandstream GXV3140/3175
• Yealink SIP-T19P/SIP-T21P/T22P/T26P/T28P/T4X
• Yealink SIP-T20P
53. Some of the parameters may not be applicable depending on the Standard SIP Phone you have connected to the system.
To Next Page
Loading...