Matrix PRASAR UCS - Page 287

278 Matrix PRASAR UCS System Manual
• Configure the SIP Extension Settings in PRASAR UCS. For details, see “Configuring SIP Extension
Settings using Jeeves”
55
• Configure the device specific settings applicable to your Grandstream at any one of the Location1, 2 or 3
on the SIP Extensions page. To do so,
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings link.
• Click Location 1 and configure the following parameters.
55. Some of the parameters may not be applicable depending on the Standard SIP Phone you have connected. Please refer the spe-
cific Standard SIP Phone manufacturer’s documentation for more details.
Parameter Description/Action to be Taken
Applicable Standard SIP Phone
Variant
Enable Device Select the Enable Device check box.
1. Grandstream GXP110x
2. Grandstream GXP2200
3. Grandstream GXP21xx/116x/14xx
4. Grandstream GXV3140/3175
Location Name
Configure the Location Name to identify the
Standard SIP Phone. The Location Name can be a
maximum of 18 characters. Default: Blank.
1. Grandstream GXP110x
2. Grandstream GXP2200
3. Grandstream GXP21xx/116x/14xx
4. Grandstream GXV3140/3175
Device Type
Select Device Type as any of the desired
Grandstream Standard SIP Phone you want to
connect.
1. Grandstream GXP110x
2. Grandstream GXP2200
3. Grandstream GXP21xx/116x/14xx
4. Grandstream GXV3140/3175
MAC Address
Enter the MAC Address of the Grandstream phone
to be connected at this location. Default: Blank.
PRASAR UCS validates the phone on the basis of
the MAC Address, and provides configuration on
validation.
1. Grandstream GXP110x
2. Grandstream GXP2200
3. Grandstream GXP21xx/116x/14xx
4. Grandstream GXV3140/3175
Authenticate
HTTP
Provisioning
request
Select the Authenticate HTTP Provisioning request
check box to authenticate HTTP request for security
reason. Default: Disabled.
If you are using the Standard SIP Phone from the
Public IP Address, we recommend you to enable this
option.
PRASAR UCS validates the Standard SIP Phone on
the basis of the SIP ID and HTTP Authentication
Password and provides configuration on validation.
Make sure, you have configured SIP ID as HTTP
User Name and HTTP Authentication Password as
HTTP Password in the Standard SIP Phone.
1. Grandstream GXP110x
2. Grandstream GXP2200
3. Grandstream GXP21xx/116x/14xx
4. Grandstream GXV3140/3175