Matrix PRASAR UCS - Page 364

Matrix PRASAR UCS System Manual 355
• configure only one Time Zone Index with the Pulse Rate, for instance, Time Zone 1, in the CCC-Normal
Pulse Rate Table.
• Now, set the Time Schedule for Time Zone, Time Zone 1, with the start and end time in Hours: Minutes
format;
• set the start and end time of the other Time Zone Index, Time Zone 2 to Time Zone 4, to 00:00 (hours:
minutes).
Similarly, if your service provider supports two different Pulse Rates in a day, set the Start and the End time
for two Time Zones and set the other two to 00:00.
• Click Submit.
Call Duration Control
Call Duration Control (CDC) allows you to limit the duration of the conversations. CDC helps increase availability of
trunks for making outgoing calls and for receiving incoming calls, which is important in high call traffic situations.
• Click Call Duration Control to expand.
• Apply CDC for Incoming Calls: Select this check box if you wish to apply CDC for Incoming Calls.
• Apply CDC for Outgoing Calls: Select this check box if you wish to apply CDC for Outgoing Calls.
• Click Submit.
To know more, refer to “Call Duration Control (CDC)”
Miscellaneous
• Click Miscellaneous to expand.
• Apply Call Taping: By default, this check box is selected, Call Taping will be allowed.Clear the check box
to disable. To know more refer “Call Taping”.
• Priority: Select a Priority Level for the trunks on which the template will be applied.