32 Matrix PRASAR UCS System Manual
• Lift the top cover from the front side to an angle of 10 to12 degree and push backwards to open.
• Keep the cover and screws aside
There are 4 PCI Connectors for the VoIP module and four pairs of studs on the board.
• By default, one VOIP module is factory fitted, this is with the label M1, VOIP #1 on the board.
• Locate the label M2, VOIP#2 to affix the second module.
• Remove the screws on the studs for the module and keep them aside.
To Next Page
Loading...