Matrix PRASAR UCS - Page 42

Matrix PRASAR UCS System Manual 33
• Carefully hold the NX DBM VOCODER64 Module from the edges.
• Make sure you do not touch the PCB. Insert the NX DBM VOCODER64 Module into the PCI Connector
socket.
• Insert the NX DBM VOCODER64 Module into the PCI Connector socket.
• Press the Module with a finger and match the mounting holes perfectly with the stud holes. Make sure you
do not touch the PCB area of the module except the yellow line provided for grounding at the front end of
the module.
• Do not apply excessive pressure.