424 Matrix PRASAR UCS System Manual
• Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for Retry Count Expiry Prompt.
•In No Digit Dialed Action, you can select — Disconnect, Transfer to Operator, Transfer to Extension,
Transfer to Department Group, Go to VMAA Menu.
• If you select Transfer to Operator or Transfer to Department Group or Transfer to Extension,
select the respective Operator number/Department Group number or enter the desired extension
number.
In Call Transfer Profile, select the desired Call Transfer Profile as per your requirement. By default,
As Configured for Transfer Number is selected.
Click Settings to configure the parameters of the selected profile. For more information, see “Call
Transfer Profile”.
• If you select Go to VMAA Menu, select the desired VMAA Menu.
• If you select Disconnect, the system will disconnect the call.
No Match Found Settings
•In No Match Found Prompt, select the prompt which you wish to play when caller has dialed an invalid
extension name.
Select None, if you do not wish to play any prompt.
• Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for No Match Found Prompt.
• Select the No Match Found Retry check box to prompt the caller to dial the Extension Name again.
•In No Match Found Retry Count, select the number of times you wish to prompt the caller for dialing the
extension number. The prompt will be played repeatedly till the Retry Count expires.
•In Retry Count Expiry Prompt, select the prompt you wish to play when the Retry Count expires.
To Next Page
Loading...