Matrix PRASAR UCS - Page 458

Matrix PRASAR UCS System Manual 449
The digit you configure will be played as the digit to be dialed by the extension user to select the respective option.
The options will be played in the sequence — 1-9, 0, *, #. The option for which the Digit selected is None will not be
played.
After the digits have been assigned, the system will proceed further as per the options selected by you. Brief
description of each option is explained below:
• Request Read Receipt: The system will provide an option to the extension user for requesting the read
receipt to be played whenever the message is read by the destination number.
As soon as the destination number reads the message, the extension user will receive a read receipt in
form of a voice mail. To retrieve the read receipt, access your voice mail. The read receipt includes the
name, destination number and the first five seconds of the message sent or forwarded.
In case of multiple destination numbers, the extension user will receive multiple read receipts in form of a
voice message after the message has been read by the destination numbers.
• Ignore Read Receipt: The system will provide an option to the extension user for ignoring the read receipt
i.e. no read receipt will be played back to the extension user.
•In No Digit Dialed Action, select the option — Request Read Receipt, Ignore Read Receipt. This is
applicable when the extension user has not dialed any digit for Message Delivery Option. The system will
carry out the function when no digit is dialed as per the option you select.
No Match Found Settings (while collecting destination number)
No Match Found Settings are applicable when no valid match is found as the Destination Number.
•In No Match Found Prompt, select the prompt which you wish to play when the extension user has dialed
an invalid destination number/s for sending/forwarding the message.
Select None, if you do not wish to play any prompt when extension user has dialed an invalid destination
number.
• Click Settings . The Prompts Management page opens.
You may add a new prompt from here. For further details, see “Prompts Management”.
Once the files are uploaded these appear as options for No Match Found Prompt.