Matrix PRASAR UCS System Manual 43
• Use wall plugs, if required, to fix the screws. Leave the screw heads protruding from the wall to fit
into the Keyholes.
• Now, mount the phone on the wall, with the screws fitting into the Keyhole slots.
• Reverse the handset wall mount tab to make sure the handset remains intact when you mount the
phone. Push the handset wall mount tab upwards to remove it from the slot. Rotate it 180 degrees
clockwise and push it downwards into the slot.
• When you mount the phone on a desk,
• You can attach the Foot Stand in two ways as illustrated in the following.
Foot Stand attached at 30° Angle
To Next Page
Loading...