44 Matrix PRASAR UCS System Manual
Foot Stand attached at 50° Angle
If you attach the Foot Stand at 50°, the phone will be placed in an almost upright position on your
desk.
• Decide which of these positions would work for you best and accordingly attach the Foot Stand.
3. Connect the Handset to the Phone body.
• Plug the long straightened end of the phone cord into the handset jack at the bottom of the phone
marked with the handset symbol.
• Plug the other (short straight) end of the phone cord into the jack at the bottom of the handset.
To Next Page
Loading...