548 Matrix PRASAR UCS System Manual
Dialing Account Code by Number
For Extended IP Phone Users
To enter Account Code Number before making the call:
• Press DSS Key assigned to 'Account Code by Number'.
OR
•Dial 1058
• Enter Account Code
• Dial Trunk Access Code
• Dial the number of the client.
To enter Account Code Number during the call:
• Press ‘Transfer’ Key
• Press DSS Key assigned to Account Code by Number.
OR
•Dial 1058
• Enter Account Code
• Speech will be resumed.
To enter Account Code Number when Forced Account Code check box is enabled:
For Extended IP Phone Users
• Press DSS Key assigned to Account Code by Number.
OR
•Dial 1058
• Enter the Account Code Number.
• You get dial tone.
• Dial Trunk Access Code followed by the number of the client.
If you dial the Trunk Access Code to grab a trunk, without dialing the Forced Account Code, you will get an
error tone. Go ON-hook and then go OFF-hook. Now follow the same steps in the sequence mentioned
above.
Dialing Account Code by Name
For Extended IP Phone Users
To enter Account Code Name before making the call:
• Press DSS Key assigned to Account Code by Name.
OR
To Next Page
Loading...