Matrix PRASAR UCS - Page 556

Matrix PRASAR UCS System Manual 547
When you enable ‘Do not allow outgoing calls without Account Code' check box in a template, this feature
will be enabled on all SIP extensions that are assigned this template. If necessary, create a separate
template with this feature and assign this template only to those extensions that are to be assigned this
feature.
To enable Forced Account Code check box on Trunks,
•Go to SIP Trunk Parameters to program SIP Trunk.
• Click Others to expand.
• Click the Trunk Feature Template. The feature template page will open.
By default Trunk Feature Template 01 is assigned.
If you want to enable this feature on all trunks, enable it in Trunk Feature Template 01.
If you want to enable this feature only on selective trunks, program a different Template number with this
feature.
• Click Miscellaneous to expand, select the Forced Account Code check box in the template number
assigned to the trunk.
• Click Submit.
• Return to the SIP trunk parameters page.
• Now change the Trunk Feature Template number of the trunk you want to program. This number should
be the same as the template in which you have enabled the Forced Account Code check box.
• Click Submit.
How to use
Account Codes can be dialed in two ways: by Number and by Names.
Account codes, that is, number and names, can be dialed:
• before making the call,
• during the call,
• when grabbing a trunk (if Forced Account Code check box is enabled).
Print and hand out copies of the Account Code List to everyone in the organization for reference while
making calls.